Get Free Trial

Design elements - Electrical circuits

The vector stencils library "Electrical circuits" contains 49 element symbols of electrical and electronic devices, including ignitors, starters, transmitters, circuit protectors, transducers, radio and audio equipment.
Use it for drawing electronic circuit diagrams and electrical schematics.
"An electrical network is an interconnection of electrical elements such as resistors, inductors, capacitors, voltage sources, current sources and switches. An electrical circuit is a network consisting of a closed loop, giving a return path for the current. Linear electrical networks, a special type consisting only of sources (voltage or current), linear lumped elements (resistors, capacitors, inductors), and linear distributed elements (transmission lines), have the property that signals are linearly superimposable. They are thus more easily analyzed, using powerful frequency domain methods such as Laplace transforms, to determine DC response, AC response, and transient response.
A resistive circuit is a circuit containing only resistors and ideal current and voltage sources. Analysis of resistive circuits is less complicated than analysis of circuits containing capacitors and inductors. If the sources are constant (DC) sources, the result is a DC circuit.
A network that contains active electronic components is known as an electronic circuit. Such networks are generally nonlinear and require more complex design and analysis tools." [Electrical network. Wikipedia]
The symbils example "Design elements - Electrical circuits" was drawn using the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park. Read more
Electrical circuit elements
Electrical circuit elements, variable capacitor, capacitor, valve surge protector, surge protector, transducer, surge protector, step function, squib ignitor, electric squib ignitor, sphere gap surge protector, sphere gap, surge protector, solid material, material, sensing link squib, electric sensing link squib, semiconducting material, material, saw tooth, signal, pulse, protective gap surge protector, protective gap, surge protector, pickup head, reproducing pickup head, pickup head, recording pickup head, non-capacitive transducer, transducer, multigap surge protector, surge protector, material, insulating material, material, loop antenna, antenna, liquid, liquid material, junction, igniter plug, horn gap surge protector, horn gap, surge protector, ground connection, ground, gas, gas material, fuse, fixed capacitor, capacitor, explosive squib, electric explosive squib, equipotentiality, electrolytic surge protector, surge protector, electret, electret material, material, component, circuit breaker, chassis, frame ground connection, carbon block surge protector, surge protector, capacitive transducer, transducer, antenna, alarm fuse, fuse,
The vector stencils library "Electrical and telecom" contains 83 symbols of electrical and telecommunication equipment for electrical drawings and wiring diagrams of buildings, communication centers, power plants and electrical distribution systems.
"An electrical drawing, is a type of technical drawing that shows information about power, lighting, and communication for an engineering or architectural project." [Electrical drawing. Wikipedia]
Use the design elements library "Electrical and telecom" to design your own electrical drawings, plot plans of the building outside electrical wiring, floor plans with electrical and telecommunication systems layout, power-riser diagrams with panel boards, control wiring diagrams and cabling layout schemes, reflected ceiling plans and lighting panels layouts using the ConceptDraw PRO diagramming and vector drawing software.
The shapes library "Electrical and telecom" is included in the Electric and Telecom Plans solution from the Building Plans area of ConceptDraw Solution Park. Read more
Electrical and telecom symbols
Electrical and telecom symbols, watchman's station, watchman's central station, wall mounted, telephone box, data junction box, hardware, wall mounted, electrical junction box, hardware, wall light, three, poly phase, thermostat, telephone outlet, telephone key system, surface fluorescent light, stereo speaker outlet, stereo outlet, socket outlet, power outlet, switched socket, socket outlet, power outlet, double socket, socket outlet, power outlet, single phase, signal central station, push button, pull-cord switch, outside antenna, outdoor lightning, bollard, outdoor lightning, motion sensor, modular fluorescent fitting, main control, intake, maid's dignal plug, magnetic door hold, luminaire ceiling mount, light bar, intercom, inside antenna, illuminated emergency sign, emergency sign, horn, hold open unit,  electro magnetic door, ground connection, ground, fire alarm station, fire alarm sounder, fire alarm, fire alarm central station, fire alarm bell, enclosed ceiling luminaire, emergency release button, emergency light, emergency lightning point, electrical switch, switch, multi-switch, electrical switch, switch, electrical service panel, service panel, electric, door opener, electric motors, down lighter, doorbell transformer, doorbell chime, doorbell, dimmer switch, digital satellite system, detector, surface mounted, heat detector, smoke detector, city fire alarm station, fire alarm station, ceiling fan, exhaust fan fixture, card reader, access system, cable television outlet, television outlet, cable TV outlet, TV outlet, buzzer, battery, batten fluorescent, automatic fire alarm device, annunciator,
The vector stencils library "Electrical circuits" contains 49 element symbols of electrical and electronic devices, including ignitors, starters, transmitters, circuit protectors, transducers, radio and audio equipment.
Use it for drawing electronic circuit diagrams and electrical schematics.
"An electrical network is an interconnection of electrical elements such as resistors, inductors, capacitors, voltage sources, current sources and switches. An electrical circuit is a network consisting of a closed loop, giving a return path for the current. Linear electrical networks, a special type consisting only of sources (voltage or current), linear lumped elements (resistors, capacitors, inductors), and linear distributed elements (transmission lines), have the property that signals are linearly superimposable. They are thus more easily analyzed, using powerful frequency domain methods such as Laplace transforms, to determine DC response, AC response, and transient response.
A resistive circuit is a circuit containing only resistors and ideal current and voltage sources. Analysis of resistive circuits is less complicated than analysis of circuits containing capacitors and inductors. If the sources are constant (DC) sources, the result is a DC circuit.
A network that contains active electronic components is known as an electronic circuit. Such networks are generally nonlinear and require more complex design and analysis tools." [Electrical network. Wikipedia]
The symbils example "Design elements - Electrical circuits" was drawn using the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park. Read more
Electrical circuit elements
Electrical circuit elements, variable capacitor, capacitor, valve surge protector, surge protector, transducer, surge protector, step function, squib ignitor, electric squib ignitor, sphere gap surge protector, sphere gap, surge protector, solid material, material, sensing link squib, electric sensing link squib, semiconducting material, material, saw tooth, signal, pulse, protective gap surge protector, protective gap, surge protector, pickup head, reproducing pickup head, pickup head, recording pickup head, non-capacitive transducer, transducer, multigap surge protector, surge protector, material, insulating material, material, loop antenna, antenna, liquid, liquid material, junction, igniter plug, horn gap surge protector, horn gap, surge protector, ground connection, ground, gas, gas material, fuse, fixed capacitor, capacitor, explosive squib, electric explosive squib, equipotentiality, electrolytic surge protector, surge protector, electret, electret material, material, component, circuit breaker, chassis, frame ground connection, carbon block surge protector, surge protector, capacitive transducer, transducer, antenna, alarm fuse, fuse,
The vector stencils library "Terminals and connectors" contains 43 element symbols of terminals, connectors, plugs, polarized connectors, jacks, coaxial cables, and conductors.
Use it for drawing the wiring diagrams, electrical layouts, electronic schematics, and circuit diagrams.
"An electrical connector is an electro-mechanical device for joining electrical circuits as an interface using a mechanical assembly. Connectors consist of plugs (male-ended) and jacks (female-ended). The connection may be temporary, as for portable equipment, require a tool for assembly and removal, or serve as a permanent electrical joint between two wires or devices. An adapter can be used to effectively bring together dissimilar connectors.
There are hundreds of types of electrical connectors. Connectors may join two lengths of flexible copper wire or cable, or connect a wire or cable or optical interface to an electrical terminal.
In computing, an electrical connector can also be known as a physical interface... Cable glands, known as cable connectors in the US, connect wires to devices mechanically rather than electrically and are distinct from quick-disconnects performing the latter." [Electrical connector. Wikipedia]
"A terminal is the point at which a conductor from an electrical component, device or network comes to an end and provides a point of connection to external circuits. A terminal may simply be the end of a wire or it may be fitted with a connector or fastener. In network analysis, terminal means a point at which connections can be made to a network in theory and does not necessarily refer to any real physical object. In this context, especially in older documents, it is sometimes called a "pole".
The connection may be temporary, as seen in portable equipment, may require a tool for assembly and removal, or may be a permanent electrical joint between two wires or devices.
All electric cell have two terminals. The first is the positive terminal and the second is the negative terminal. The positive terminal looks like a metal cap and the negative terminal looks like a metal disc. The current flows from the positive terminal, and out through the negative terminal, replicative of current flow (positive (+) to negative (-) flow)." [Terminal (electronics). Wikipedia]
The shapes example "Design elements - Terminals and connectors" was drawn using the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park. Read more
Terminal and connector symbols
Terminal and connector symbols, terminal board, terminal strip, small, D connector, D-type connector, shielded, RCA, plug, shielded, RCA, jack, normalled, jack, circuit, male contact, large, D connector, D-type connector, female contact, coaxial, outside conductor, coaxial plug, coaxial jack, circuit terminal, center conductor coaxial, outside conductor, chassis, cable termination, single line, cable termination, complete, adapter, male-male, adapter, male-female, C header connector, 15 pin, type C, AC out, AC power out, 3-conductor, polarized connector, male, 3-conductor, polarized connector, female, 2-conductor, plug, 2-conductor, nonpolarized connector, male, 2-conductor, nonpolarized connector, female, 2-conductor, jack,
The vector stencils library "Switches" contains 25 symbols of electrical and light switches and breakers.
"In electrical engineering, a switch is an electrical component that can break an electrical circuit, interrupting the current or diverting it from one conductor to another.
The most familiar form of switch is a manually operated electromechanical device with one or more sets of electrical contacts, which are connected to external circuits.
A switch may be directly manipulated by a human as a control signal to a system, ... or to control power flow in a circuit, such as a light switch. Automatically operated switches can be used to control the motions of machines, for example, to indicate that a garage door has reached its full open position or that a machine tool is in a position to accept another workpiece. Switches may be operated by process variables such as pressure, temperature, flow, current, voltage, and force, acting as sensors in a process and used to automatically control a system. For example, a thermostat is a temperature-operated switch used to control a heating process. A switch that is operated by another electrical circuit is called a relay." [Switch. Wikipedia]
Use the design elements library "Switches" for drawing light switches layouts, electrical and telecommunication equipment floor plans for building design and construction using the ConceptDraw PRO diagramming and vector drawing software.
The shapes library "Switches" is included in the Electric and Telecom Plans solution from the Building Plans area of ConceptDraw Solution Park. Read more
Electrical switch symbols
Electrical switch symbols, weatherproof, circuit breaker, weatherproof switch, weatherproof fused switch, three-way switch, switch, timer, switch, pilot lamp, switch control, single pole, double throw switch, single pole switch, remote control switch, momentary contact switch, low voltage, switch, low voltage, master switch, key operated switch, pilot light, key operated switch, horizontally mounted, switch, glow switch toggle, fused switch, four-way switch, electrolier switch, double pole switch, dimmer switch, circuit breaker, automatic door switch,
The vector stencils library "Lamps, acoustics, readouts" contains 35 element symbols of lamps, acoustic components, electrical measuring instruments for drawing electrical schematics and electronic circuit diagrams.
"Electrical measurements are the methods, devices and calculations used to measure electrical quantities. Measurement of electrical quantities may be done to measure electrical parameters of a system. Using transducers, physical properties such as temperature, pressure, flow, force, and many others can be converted into electrical signals, which can then be conveniently measured and recorded." [Electrical measurements. Wikipedia]
"A lamp is a replaceable component such as an incandescent light bulb, which is designed to produce light from electricity." [Lamp (electrical component). Wikipedia]
"An electric bell is a mechanical bell that... functions by means of an electromagnet. When an electric current is applied, it produces a repetitive buzzing or clanging sound." [Electric bell. Wikipedia]
"A buzzer or beeper is an audio signalling device, which may be mechanical, electromechanical, or piezoelectric." [Buzzer. Wikipedia]
"Electronic sirens incorporate circuits such as oscillators, modulators, and amplifiers to synthesize a selected siren tone (wail, yelp, pierce/priority/phaser, hi-lo, scan, airhorn, manual, and a few more) which is played through external speakers." [Siren (noisemaker). Wikipedia]
"A microphone (colloquially called a mic or mike...) is an acoustic-to-electric transducer or sensor that converts sound in air into an electrical signal. ...
Most microphones today use electromagnetic induction (dynamic microphone), capacitance change (condenser microphone) or piezoelectric generation to produce an electrical signal from air pressure variations." [Microphone. Wikipedia]
The symbols example "Design elements - Lamps, acoustics, readouts" was drawn using the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park. Read more
Lamps, acoustics, electrical measuring instruments
Lamps, acoustics, electrical measuring instruments, speaker, microphone, speaker, microphone, push-pull, microphone, capacitor, microphone, lamp, signal lamp, lamp, non-indicating lamp, lamp, indicating lamp, lamp, indicator, meter, wavemeter, indicator, meter, voltmeter, indicator, meter, thermometer, indicator, meter, synchroscope, indicator, meter, oscilloscope, indicator, meter, galvanometer, indicator, meter, frequency meter, indicator, meter, ammeter, fluorescent lamp, buzzer, bell, siren, bell,
The vector stenvils library "Outlets" contains 57 symbols of electrical outlets for drawing building interior design, electrical floor plans and layouts of AC power plugs and sockets.
"AC power plugs and sockets are devices that allow electrically operated equipment to be connected to the primary alternating current (AC) power supply in a building. Electrical plugs and sockets differ in voltage and current rating, shape, size and type of connectors. The types used in each country are set by national standards, some of which are listed in the IEC technical report TR 60083, Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC.
Plugs and sockets for portable appliances started becoming available in the 1880s, to replace connections to light sockets with easier to use wall-mounted outlets. A proliferation of types developed to address the issues of convenience and protection from electric shock. Today there are approximately 20 types in common use around the world, and many obsolete socket types are still found in older buildings. Co-ordination of technical standards has allowed some types of plugs to be used over wide regions to facilitate trade in electrical appliances, and for the convenience of travellers and consumers of imported electrical goods. Some multi-standard sockets allow use of several different types of plugs; improvised or unapproved adapters between incompatible sockets and plugs may not provide the full safety and performance of an approved adapter." [AC power plugs and sockets. Wikipedia]
The example "Design elements - Outlets" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Electric and Telecom Plans solution from the Building plans area of ConceptDraw Solution Park. Read more
Electrical outlet symbols
Electrical outlet symbols, weatherproof phone outlet, weatherproof convenience outlet, weatherproof TV outlet, wall phone outlet, wall mounted, data, telephone, outlet, wall mounted, data outlet, vapor discharge lamp outlet, triplex outlet, television outlet, telephone outlet, switch, convenience outlet, split wired, triplex outlet, split wired, duplex outlet, special-purpose outlet, special-purpose connection, provision for connection, single outlet, switch, single outlet, range outlet, radio, convenience outlet, radio outlet, quadruplex outlet, pull switch, phone feed, multi-purpose outlet, multi-outlet assembly, local area network outlet, LAN outlet, lamp holder, pull switch, lamp holder, junction box, heavy duty outlet, convenience outlet, heavy duty outlet, floor special-purpose outlet, floor receptacle, floor phone outlet, floor mounted, outlet, floor TV outlet, fiber outlet, fax outlet, fan outlet, exit light outlet, emergency circuit single outlet, emergency circuit quadruplex outlet, emergency circuit duplex outlet, electrical outlet, duplex special-purpose outlet, duplex ground fault interrupter, duplex convenience outlet, drop outlet, door phone outlet, dedicated duplex outlet, data, voice, power, floor mounted, outlet, computer data outlet, clock hanger outlet, mounted , blanked outlet, TV, phone, outlet, TV feed, 240v outlet,

electrical diagram, electrical engineering, electrical schematic, electrical schematic symbols, electrical diagram symbols  Electrical Engineering

This solution extends ConceptDraw PRO v.9.5 (or later) with electrical engineering samples, electrical schematic symbols, electrical diagram symbols, templates and libraries of design elements, to help you design electrical schematics, digital and analog Read more
electrical diagram, electrical engineering, electrical schematic, electrical schematic symbols, electrical diagram symbols
The vector stencils library "Resistors" contains 14 element symbols of resistors for drawing electronic schematics, circuit diagrams and electrical drawings.
"A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. Resistors may have fixed resistances or variable resistances, such as those found in thermistors, varistors, trimmers, photoresistors and potentiometers.
The current through a resistor is in direct proportion to the voltage across the resistor's terminals. This relationship is represented by Ohm's law ...
Resistors are common elements of electrical networks and electronic circuits and are ubiquitous in electronic equipment. Practical resistors can be composed of various compounds and films, as well as resistance wires (wire made of a high-resistivity alloy, such as nickel-chrome). Resistors are also implemented within integrated circuits, particularly analog devices, and can also be integrated into hybrid and printed circuits." [Resistor. Wikipedia]
The shapes example "Design elements - Resistors" was drawn using the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park. Read more
Resistor symbols
Resistor symbols, variable resistor, resistor, variable attenuator, attenuator, pre-set resistor, resistor, pre-set potentiometer, potentiometer, potentiometer, fixed resistor, resistor, fixed attenuator, attenuator, continuous resistor, resistor,