Get Free Trial

Design elements - Outlets

The vector stenvils library "Outlets" contains 57 symbols of electrical outlets for drawing building interior design, electrical floor plans and layouts of AC power plugs and sockets.
"AC power plugs and sockets are devices that allow electrically operated equipment to be connected to the primary alternating current (AC) power supply in a building. Electrical plugs and sockets differ in voltage and current rating, shape, size and type of connectors. The types used in each country are set by national standards, some of which are listed in the IEC technical report TR 60083, Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC.
Plugs and sockets for portable appliances started becoming available in the 1880s, to replace connections to light sockets with easier to use wall-mounted outlets. A proliferation of types developed to address the issues of convenience and protection from electric shock. Today there are approximately 20 types in common use around the world, and many obsolete socket types are still found in older buildings. Co-ordination of technical standards has allowed some types of plugs to be used over wide regions to facilitate trade in electrical appliances, and for the convenience of travellers and consumers of imported electrical goods. Some multi-standard sockets allow use of several different types of plugs; improvised or unapproved adapters between incompatible sockets and plugs may not provide the full safety and performance of an approved adapter." [AC power plugs and sockets. Wikipedia]
The example "Design elements - Outlets" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Electric and Telecom Plans solution from the Building plans area of ConceptDraw Solution Park. Read more
Electrical outlet symbols
Electrical outlet symbols, weatherproof phone outlet, weatherproof convenience outlet, weatherproof TV outlet, wall phone outlet, wall mounted, data, telephone, outlet, wall mounted, data outlet, vapor discharge lamp outlet, triplex outlet, television outlet, telephone outlet, switch, convenience outlet, split wired, triplex outlet, split wired, duplex outlet, special-purpose outlet, special-purpose connection, provision for connection, single outlet, switch, single outlet, range outlet, radio, convenience outlet, radio outlet, quadruplex outlet, pull switch, phone feed, multi-purpose outlet, multi-outlet assembly, local area network outlet, LAN outlet, lamp holder, pull switch, lamp holder, junction box, heavy duty outlet, convenience outlet, heavy duty outlet, floor special-purpose outlet, floor receptacle, floor phone outlet, floor mounted, outlet, floor TV outlet, fiber outlet, fax outlet, fan outlet, exit light outlet, emergency circuit single outlet, emergency circuit quadruplex outlet, emergency circuit duplex outlet, electrical outlet, duplex special-purpose outlet, duplex ground fault interrupter, duplex convenience outlet, drop outlet, door phone outlet, dedicated duplex outlet, data, voice, power, floor mounted, outlet, computer data outlet, clock hanger outlet, mounted , blanked outlet, TV, phone, outlet, TV feed, 240v outlet,

Electrical Symbols — Terminals and Connectors

An electrical connector, is an electro-mechanical device used to join electrical terminations and create an electrical circuit. Electrical connectors consist of plugs (male-ended) and jacks (female-ended). The connection may be temporary, as for portable equipment, require a tool for assembly and removal, or serve as a permanent electrical joint between two wires or devices. 26 libraries of the Electrical Engineering Solution of ConceptDraw PRO make your electrical diagramming simple, efficient, and effective. You can simply and quickly drop the ready-to-use objects from libraries into your document to create the electrical diagram. Read more
This electrical floot plan sample shows the Power socket outlet layout.
"The term plug is in general and technical use in all forms of English, common alternatives being power plug, electric plug, and (in the UK) plug top. The normal technical term (in both British and International English) for an AC power socket is socket-outlet, but in non-technical common use a number of other terms are used. In British English the general term is socket, but there are numerous common alternatives, including power point, plug socket, wall socket, and wall plug. In American English receptacle and outlet are common, sometimes with qualifiers such as wall outlet, electrical outlet and electrical receptacle, all of these sometimes to be found in the same document. A socket may be surrounded by a decorative and/or protective cover called a wall plate, face plate, outlet cover, socket cover, or wall cover. In some designs this is an integral piece with the socket itself, bought and installed as a single unit." [AC power plugs and sockets. Wikipedia]
The electrical floot plan example "Power socket outlet layout" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Electric and Telecom Plans solution from the Building plans area of ConceptDraw Solution Park. Read more
Electrical floot plan
Electrical floot plan, window, casement, wall, socket outlet, power outlet, switched socket, socket outlet, power outlet, double socket, socket outlet, power outlet, main control, intake, door,

Standard Universal Audio & Video Connection Types

The Audio & Video Connectors solution contains a set of pre-designed objects, libraries, templates, and samples; allowing quick and easy diagramming of various configurations of audio and video devices. Read more
The vector stencils library "Audio and video connectors" contains 94 symbols of audio and video connectors (TRS, TS, XLR, microphone, headphone, TOSLINK, DVI, VGA, DFP, S-Video, RCA, display port, HDMI, Thunderbolt, coaxial TV, F connector, MIDI) and device silhouettes.
Use these jacks and plugs clipart icons for drawing hook up diagrams.
"Audio connectors and video connectors are electrical connectors (or optical connectors) for carrying audio signal and video signal, of either analog or digital format. Analog A/V connectors often use shielded cables to inhibit radio frequency interference (RFI) and noise." [Audio and video connector. Wikipedia]
"The existence of many different audio and video standards necessitates the definition of hardware interfaces, which define the physical characteristics of the connections between electrical equipment. This includes the types and numbers of wires required along with the strength and frequency of the signal. It also includes the physical design of the plugs and sockets.
An interface may define a connector that is used only by that interface (e.g., DVI) or may define a connector that is also used by another interface; for example, RCA connectors are defined both by the composite video and component video interfaces.
Audio connectors and video connectors are electrical connectors (or optical connectors) for carrying audio signal and video signal, of either analog or digital format. Analog A/V connectors often use shielded cables to inhibit radio frequency interference (RFI) and noise.
Since both analog and digital signals are used with some styles of connectors, knowledge of the interface used is necessary for a successful transfer of signals. Some interface types use only a distinctive connector or family of connectors, to ensure compatibility. Especially with analog interfaces, physically interchangeable connectors may not carry compatible signals.
Some of these connectors, and other types of connectors, are also used at radio frequency (RF) to connect a radio or television receiver to an antenna or to a cable system..." [Audio and video interfaces and connectors. Wikipedia]
The clipart icons example "Design elements - Audio and video connectors" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Audio and Video Connectors solution from the Engineering area of ConceptDraw Solution Park. Read more
Audio and video jacks and plugs
Audio and video jacks and plugs, thunderbolt, plug, connector, thunderbolt, jack, connector, mini display port, socket, mini display port, plug, connector, microphone, mini jack, connector, microphone, mini jack, cable, headphone, mini jack, connector, headphone, mini jack, cable, display port, socket, display port, plug, connector, device, half part, device, coaxial, TV, plug, connector, coaxial, TV, jack, connector, XLR, male, Neutrik, connector, XLR, female, Neutrik, connector, XLR male Neutrik, XLR female Neutrik, VGA plug, TV, TS, jack, connector, TS plug, TRS, plug, connector, phone connector, TRS, micro-jack, plug, connector, phone connector, TRS, micro-jack, connector, TRS, jack, connector, TOSLINK, optical, jack, connector, TOSLINK, optical audio cable, S-Video plug, RCA, phono, cinch, socket, RCA connector, RCA jack, phono connector, cinch connector, Mini DVI plug, MIDI, connector, HDMI, plug, connector, HDMI, jack, connector, F connector, jack, F connector plug, connector, DVI-I, single link, jack, connector, DVI-I, dual link, jack, connector, DVI plug, DFP plug,
The vector stencils library "Terminals and connectors" contains 43 element symbols of terminals, connectors, plugs, polarized connectors, jacks, coaxial cables, and conductors.
Use it for drawing the wiring diagrams, electrical layouts, electronic schematics, and circuit diagrams.
"An electrical connector is an electro-mechanical device for joining electrical circuits as an interface using a mechanical assembly. Connectors consist of plugs (male-ended) and jacks (female-ended). The connection may be temporary, as for portable equipment, require a tool for assembly and removal, or serve as a permanent electrical joint between two wires or devices. An adapter can be used to effectively bring together dissimilar connectors.
There are hundreds of types of electrical connectors. Connectors may join two lengths of flexible copper wire or cable, or connect a wire or cable or optical interface to an electrical terminal.
In computing, an electrical connector can also be known as a physical interface... Cable glands, known as cable connectors in the US, connect wires to devices mechanically rather than electrically and are distinct from quick-disconnects performing the latter." [Electrical connector. Wikipedia]
"A terminal is the point at which a conductor from an electrical component, device or network comes to an end and provides a point of connection to external circuits. A terminal may simply be the end of a wire or it may be fitted with a connector or fastener. In network analysis, terminal means a point at which connections can be made to a network in theory and does not necessarily refer to any real physical object. In this context, especially in older documents, it is sometimes called a "pole".
The connection may be temporary, as seen in portable equipment, may require a tool for assembly and removal, or may be a permanent electrical joint between two wires or devices.
All electric cell have two terminals. The first is the positive terminal and the second is the negative terminal. The positive terminal looks like a metal cap and the negative terminal looks like a metal disc. The current flows from the positive terminal, and out through the negative terminal, replicative of current flow (positive (+) to negative (-) flow)." [Terminal (electronics). Wikipedia]
The shapes example "Design elements - Terminals and connectors" was drawn using the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park. Read more
Terminal and connector symbols
Terminal and connector symbols, terminal board, terminal strip, small, D connector, D-type connector, shielded, RCA, plug, shielded, RCA, jack, normalled, jack, circuit, male contact, large, D connector, D-type connector, female contact, coaxial, outside conductor, coaxial plug, coaxial jack, circuit terminal, center conductor coaxial, outside conductor, chassis, cable termination, single line, cable termination, complete, adapter, male-male, adapter, male-female, C header connector, 15 pin, type C, AC out, AC power out, 3-conductor, polarized connector, male, 3-conductor, polarized connector, female, 2-conductor, plug, 2-conductor, nonpolarized connector, male, 2-conductor, nonpolarized connector, female, 2-conductor, jack,

Audio and Video Configurations

The Audio & Video Connectors solution contains a set of pre-designed objects, libraries, templates, and samples; allowing quick and easy diagramming of various configurations of audio and video devices. Read more

Making Your Audio and Video Connections

The Audio & Video Connectors solution contains a set of pre-designed objects, libraries, templates, and samples; allowing quick and easy diagramming of various configurations of audio and video devices. Read more

Audio & Video Connections

The Audio & Video Connectors solution contains a set of pre-designed objects, libraries, templates, and samples; allowing quick and easy diagramming of various configurations of audio and video devices. Read more

Audio and Video Interfaces and Connectors

The Audio & Video Connectors solution contains a set of pre-designed objects, libraries, templates, and samples; allowing quick and easy diagramming of various configurations of audio and video devices. Read more