This site uses cookies. By continuing to browse the ConceptDraw site you are agreeing to our Use of Site Cookies.
"Markings.
Lines.
The centre line divides the ice in half crosswise. It is used to judge icing, meaning that if a team sends the puck across the centre line (red line), blue line and then across the goal line (that is to say, shoots or dumps the puck past the goal line from behind their own side of the centre line) it is said to be icing. ...
Faceoff spots and circles.
There are 9 faceoff spots on a hockey rink. Most faceoffs take place at these spots. There are two spots in each end zone, two at each end of the neutral zone, and one in the centre of the rink.
There are faceoff circles around the centre ice and end zone faceoff spots. There are hash marks painted on the ice near the end zone faceoff spots. The circles and hash marks show where players may legally position themselves during a faceoff or in game play. ...
Spot and circle dimensions.
Both the center faceoff spot and center faceoff circle are blue. The spot is a solid blue circle 12 inches (30 cm) in diameter. Within the spot is a center, a circle 30 feet (9.1 m) in diameter, painted with a blue line 2 inches (5.1 cm) in width.
All of the other faceoff spots have outlines 2 inches (5.1 cm) thick, forming a circle 2 feet (0.61 m) in diameter measured from the outsides of the outlines, and are filled in with red in all areas except for the 3 inches (7.6 cm) space from the tops and bottoms of the circles, measured from the insides of the outline. ...
Goal posts and nets.
At each end of the ice, there is a goal consisting of a metal goal frame and cloth net in which each team must place the puck to earn points. According to NHL and IIHF rules, the entire puck must cross the entire goal line in order to be counted as a goal. ...
Goal area.
The crease is a special area of the ice designed to allow the goaltender to perform without interference. In most leagues, goals are disallowed if an attacking player enters the goal crease with a stick, skate, or any body part before the puck. For the purposes of this rule, the crease extends vertically from the painted lines to the top of the goal frame. ...
Goaltender trapezoid.
During the 2004-05 American Hockey League (AHL) season, an experimental rule was implemented for the first seven weeks of the season, instituting a goaltender trap zone, more commonly called the trapezoid in reference to its shape. Under the rule, it is prohibited for the goaltender to handle the puck anywhere behind the goal line that is not within the trapezoidal area. If they do so they are assessed a minor penalty for delay of game. ...
Referee's crease.
The referee's crease is a semicircle ten feet in radius in front of the scorekeepers bench." [Ice hockey rink. Wikipedia]
The diagram template "Ice hockey rink view from long side" for the ConceptDraw PRO diagramming and vector drawing software is included in the Hockey solution from the Sport area of ConceptDraw Solution Park.
Ice hockey rink diagram template
Ice hockey rink diagram template, hockey field, hockey field diagram, hockey field layout,
Used Solutions

How To Create Restaurant Floor Plan in Minutes

Restaurant Floor Plans solution for ConceptDraw PRO has 49 extensive restaurant symbol libraries that contains 1495 objects of building plan elements; many examples and templates for drawing floor plans and restaurant layouts.
It helps make a layout for a restaurant — restaurant floor plans, cafe floor plans, bar area, floor plan of a fast food restaurant, restaurant furniture layout, etc.
ConceptDraw PRO — great restaurant floor planner. You do not need to be an artist to create great-looking restaurant floor plans in minutes.
What is ConceptDraw PRO
What is ConceptDraw PRO

landscape plan, how to design a garden, modern garden design, how to design landscape, landscape design tools Landscape & Garden

landscape plan, how to design a garden, modern garden design, how to design landscape, landscape design tools
The Landscape and Gardens solution for ConceptDraw PRO v10 is the ideal drawing tool when creating landscape plans. Any gardener wondering how to design a garden can find the most effective way with Landscape and Gardens solution.

seven management and planning tools Seven Management and Planning Tools

seven management and planning tools
Seven Management and Planning Tools solution extends ConceptDraw PRO and ConceptDraw MINDMAP with features, templates, samples and libraries of vector stencils for drawing management mind maps and diagrams.

IDEF0 standard with ConceptDraw PRO

The activity of any organization is more or less branchy network of processes. The description of these processes is a hard technical task which requires definite methodology and standards.
According to the IDEF0 standard any process can be described in the form of a block (Activity Box) which has inputs and outputs. The process consists in transformation of inputs into outputs under the influence of the management and in the presence of necessary resources. Outputs of the given process later on can be either inputs for the next process or resources, or management means.
The vector stencils library "Cafe and restaurant" contains shapes of furniture and equipment. Use these shapes for drawing cafe and restaurant design plans, arrangement and layouts in the ConceptDraw PRO diagramming and vector drawing software extended with the Cafe and Restaurant solution from the Building Plans area of ConceptDraw Solution Park.
Bistro Set for 2
Bistro Set for 2, bistro set,
Booth - Left Facing
Booth - Left Facing, booth,
Booth - Right Facing
Booth - Right Facing, booth,
Corner Booth
Corner Booth, corner booth,
Corner Bench with Rounded End
Corner Bench with Rounded End, corner bench,
Corner Bench 1
Corner Bench 1, corner bench,
Corner Bench 2
Corner Bench 2, corner bench,
Corner Bench 3
Corner Bench 3, corner bench,
Semicircular Bench
Semicircular Bench, demicircular bench,
Hostess Podium
Hostess Podium, hostess podium,
Patio Table for 4
Patio Table for 4, patio table,
Rectangular Table for 4
Rectangular Table for 4, rectangular table, table,
Square Table for 4
Square Table for 4, square table, table,
Round Table for 4
Round Table for 4, round table, table,
Corner Counter
Corner Counter, corner counter,
Round Table
Round Table, round table, table,
Square Table with Rounded Corners
Square Table with Rounded Corners, square table, table,
Corner Table
Corner Table, corner table, table,
Curved back chair
Curved back chair, curved back, chair,
Chair 2
Chair 2, chair,
Salad Bar
Salad Bar, salad bar,
Patio Awning
Patio Awning, patio awning,

How to Draw a Landscape Design Plan

What is landscape design? It's a floor plan but for an outdoor area.
Same as a floor plan, a landscape design represents visually any site using scaled dimensions.
The main purpose of landscape design is to plan the layout for an outdoor area no matter is it a personal site plan for your home or a commercial plan for business. It may also be handful when a new installation, repair or even an outdoor event is planning.

It helps to calculate time and decide which materials should be used in your project. Landscape designs perfectly gives the property owner and landscape contractor better vision for cost estimation, helping to ensure the project time and budget.

How To use Landscape Design Software

Usually landscape design associates with something complex and hard to learn. It is important to zone the area, to project the utility systems, to make a sketch of the future garden. Landscape and Garden Solution allows you to unlock your creativity and design a vibrant garden plan easily.
ConceptDraw PRO diagramming and vector drawing software extended with Landscape & Garden Solution offers powerful drawing tools and numerous collection of pre-designed vector objects for effective landscape design, landscape plans, deck plans, patio plans, floor plans.

Landscape Plan

A landscape plan depicts all the features of a future garden including buildings, plants, lawns or a patio. Such plan is a very important part of site adjustment because it gives a complete picture of future project.
The vector stencils library "Furniture" contains 38 shapes of living-room, dining-room and bedroom furniture. Use it for drawing furniture arrangements, home decor, residential floor plans, home design, space plans, and furniture layouts in the ConceptDraw PRO diagramming and vector drawing software extended with the Floor Plans solution from the Building Plans area of ConceptDraw Solution Park.
Ping-Pong Table
Ping-Pong Table, ping-pong table,
Pool Table
Pool Table, pool table,
Grand Piano
Grand Piano, grand piano,
Spinet Piano
Spinet Piano, spinet piano,
Chest
Chest, chest,
Double Dresser
Double Dresser, double dresser,
Triple Dresser
Triple Dresser, triple dresser,
Wardrobe 1
Wardrobe 1, wardrobe,
Wardrobe 2
Wardrobe 2, wardrobe,
Buffet/Hutch
Buffet/Hutch, hutch,
Desk
Desk, desk,
Bookcase
Bookcase, bookcase,
Rectangular Blue Rug
Rectangular Blue Rug, rectangular, blue, rug,
Rectangular Rug
Rectangular Rug, rectangular rug,
Oval Blue Rug
Oval Blue Rug, oval, blue, rug,
Oval Rug
Oval Rug, oval rug,
Square Blue Rug
Square Blue Rug, square, blue, rug,
Square Rug
Square Rug, square rug,
Round Blue Rug
Round Blue Rug, round, blue, rug,
Round Orange Rug
Round Orange Rug, round, orange, rug,
Hearth
Hearth, hearth,
Fireplace
Fireplace, fireplace,
Corner Fireplace
Corner Fireplace, corner fireplace,
Coat Rack
Coat Rack, coat rack,
Wall Hooks 1
Wall Hooks 1, wall hooks,
Wall Hooks 2
Wall Hooks 2, wall hooks,
Television
Television, television, TV,
Flatscreen TV
Flatscreen TV, flat screen TV,
Desk Lamp
Desk Lamp, desk lamp,
Wood Stove
Wood Stove, wood stove,
Floor Vent
Floor Vent, floor vent,
Table Lamp
Table Lamp, table lamp,
Waste Can
Waste Can, waste can, wastebasket,
Square Waste Can
Square Waste Can, square, waste can, wastebasket,
Baseboard Heater
Baseboard Heater, baseboard heater,
Radiator
Radiator, radiator,
House Plant
House Plant, house plant, potted plant,
Large Plant
Large Plant, plant, potted plant,