Mechanical Engineering

This solution extends ConceptDraw PRO v.9 mechanical drawing software (or later) with samples of mechanical drawing symbols, templates and libraries of design elements, for help when drafting mechanical engineering drawings, or parts, assembly, pneumatic,

Mechanical Engineering

The vector stencils library "Hydraulic pumps and motors" contains 74 symbols of hydraulic equipment.
Use these shapes for engineering drawings of fluid power and hydraulic control systems in the ConceptDraw PRO diagramming and vector drawing software extended with the Mechanical Engineering solution from the Engineering area of ConceptDraw Solution Park.
www.conceptdraw.com/ solution-park/ engineering-mechanical

Pump, hydraulic

Motor, hydraulic

Pump-motor, hydraulic

Pump, fixed, external drain

Pump, variable

Pump, variable, external drain

Pump, var., manual override

Pump, var., manual override, drain

Pump, var., solenoid

Pump, var., solenoid, drain

Pump, var., solenoid 2

Pump, var., solenoid 2, drain

Pump, var., var. solenoid

Pump, var., var. solenoid, drain

Pump, var., var. solenoid 2

Pump, var., var. solenoid 2, drain

Pump, var., var., roller

Pump, var., roller, drain

Motor, fixed, external drain

Motor, variable

Motor, variable, external drain

Motor, var., manual override

Motor, var., manual override, drain

Motor, var., solenoid

Motor, var., solenoid, drain

Motor, var., solenoid 2

Motor, var., solenoid 2, drain

Motor, var., var. solenoid

Motor, var., var. solenoid, drain

Motor, var., var. solenoid 2

Motor, var., var. solenoid 2, drain

Motor, var., var., roller

Motor, var., roller, drain

Pump-motor, fixed, external drain

Pump-motor, variable

Pump-motor, variable, external drain

Pump-motor, var., manual override

Pump-motor, var., manual override, drain

Pump-motor, var., solenoid

Pump-motor, var., solenoid, drain

Pump-motor, var., solenoid 2

Pump-motor, var., solenoid 2, drain

Pump-motor, var., var. solenoid

Pump-motor, var., var. solenoid, drain

Pump-motor, var., var. solenoid 2

Pump-motor, var., var. solenoid 2, drain

Pump-motor, var., var., roller

Pump-motor, var., roller, drain

Pump, fixed 2

Pump, fixed 2, drain

Pump, variable (sgl side)

Pump, variable (sgl side), drain

Pump, variable (dbl side)

Pump, variable (dbl side), drain

Motor, fixed 2

Motor, variable (sgl side)

Motor, variable (dbl side)

Motor, fixed 2, drain

Motor, variable (sgl side), drain

Motor, variable (dbl side), drain

Pump-motor, fixed 2

Pump-motor, fixed 2, drain

Pump-motor, variable (sgl side)

Pump-motor, variable (sgl side), drain

Pump-motor, variable (dbl side)

Pump-motor, variable (dbl side), drain

Pump, variable displacement

Motor, variable displacement

Pump-motor, variable displacement

Floating motor

Pressure compensator

Used Solutions

Engineering >

Mechanical Engineering

A simple hydraulic schematic showing apparatus for testing the strength of a hydraulic hose splice.
Water enters through normally closed solenoid valve (1) and passes through intake flow meter (2) to high pressure pump (4). Intake water pressure is monitored by pressure gauge (3). The hose to be tested connects between pump (4) and normally open solenoid activated drain valve (7). To test the hose, pump drive motor (5) is turned on, the solenoid of drain valve (7) is activated, closing the valve, and the pump is run to pressurize the hose. Test pressure is monitored by gauge (6). When the test is complete or the hose fails, the solenoid of drain valve (7) is deactivated, opening valve and discharging water, depressurizing the system. All components are operated electrically by a remote control circuit so that the operator may perform the test from a protected location, monitoring it with a camera and video monitor.
This hydraulic schematic example was redrawn using ConceptDraw PRO diagramming and vector drawing software from the Wikimedia Commons file: Hydraulic schematic.jpg.
[commons.wikimedia.org/ wiki/ File:Hydraulic_ schematic.jpg]
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
[creativecommons.org/ licenses/ by-sa/ 3.0/ deed.en]
The hydraulic schematic example "Apparatus for testing the strength of a hydraulic hose splice" is included in the Mechanical Engineering solution from the Engineering area of ConceptDraw Solution Park.

Hydraulic system schematic

Used Solutions

Engineering >

Mechanical Engineering

"A hydraulic circuit is a system comprising an interconnected set of discrete components that transport liquid. The purpose of this system may be to control where fluid flows (as in a network of tubes of coolant in a thermodynamic system) or to control fluid pressure (as in hydraulic amplifiers).
... hydraulic circuit theory works best when the elements (passive component such as pipes or transmission lines or active components such as power packs or pumps) are discrete and linear. This usually means that hydraulic circuit analysis works best for long, thin tubes with discrete pumps, as found in chemical process flow systems or microscale devices." [Hydraulic circuit. Wikipedia]
The engineering drawing example "Hydraulic circuits" was redrawn using ConceptDraw PRO diagramming and vector drawing software from the Wikimedia Commons file: Hydraulic circuits.png.
[commons.wikimedia.org/ wiki/ File:Hydraulic_ circuits.png]
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
[creativecommons.org/ licenses/ by-sa/ 3.0/ deed.en]
The engineering drawing example "Hydraulic circuits" is included in the Mechanical Engineering solution from the Engineering area of ConceptDraw Solution Park.

Hydraulic circuit schematic

Used Solutions

Engineering >

Mechanical Engineering

Retract resistor check valve application: pneumatic cylinder, piston driven by Compressed air through 2 Retract resistor check valves.
"A check valve, clack valve, non-return valve or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction.
Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves are often part of common household items. Although they are available in a wide range of sizes and costs, check valves generally are very small, simple, or inexpensive. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem. The bodies (external shells) of most check valves are made of plastic or metal.
An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. Typically the check valve is designed for and can therefore be specified for a specific cracking pressure.
Heart valves are essentially inlet and outlet check valves for the heart ventricles, since the ventricles act as pumps." [Check valve. Wikipedia]
This hydraulic schematic example was redrawn using ConceptDraw PRO diagramming and vector drawing software from the Wikimedia Commons file: Retract resistor check valve application.png.
[commons.wikimedia.org/ wiki/ File:Retract_ resistor_ check_ valve_ application.png]
The hydraulic engineering drawing example "Retract resistor check valve application" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Mechanical Engineering solution from the Engineering area of ConceptDraw Solution Park.

Hydraulic schematic

Used Solutions

Engineering >

Mechanical Engineering

Download ConceptDraw PRO
Free 21 Trial for Mac and PC

Buy Now